Introducing the processor to the motherboard
Before the motherboard is introduced into the packaging, first introduce the processor since it will be more straightforward to introduce. This is the way to connect the processor to the motherboard.
a. We initially decide the place of pin 1 on the processor and the processor attachment on the motherboard, by and large situated in a corner set apart with a spot or speck.
b. Lift the attachment secure switch to open it.
c. Change the place of the processor feet with the attachment openings, then, at that point, press the processor into the attachment firmly.
d. Lock back with lock switch.
Introducing the heatsink and fan
To introduce the heatsink and fan on the motherboard, follow these means.
a. Introduce the heatsink and cooling fan over the processor. While introducing it should be squeezed slantingly or across.
b. Plug the fan connector into the current attachment. Do whatever it takes not to get the fan link excessively near the attachment, yet in addition not excessively far from the attachment.
Mounting the motherboard for the situation
The motherboard is appended to the situation with screws and mounts. To introduce the motherboard for the situation, follow these means.
a. Decide the place of the openings for every plastic and metal mount. The openings for the metal mounts or metal spacers are set apart with rings on the edges of the openings.
b. Introduce the metal or plastic holder on the packaging plate as indicated by the place of each relating mounting opening on the motherboard.
c. Place the motherboard in the packaging plate with the goal that the head holder stands into a more healthy place on the motherboard. Introduce the locking screw on every metal holder.
d. Introduce the I/O port edge (I/O sheild) on the motherboard assuming that you have one.
e. Introduce the packaging plate that has the motherboard introduced on the packaging and lock it with screws.
Introducing RAM or memory
How to introduce Slam or memory, first open the lock switch and afterward change the memory pins to the spaces on the PC. When totally fit, simply press the memory until the lock closes itself.
supplant the power supply
Power supply is a device that serves electrical power for all parts in the PC framework unit. assuming we normally purchase the packaging sure the power supply is as of now introduced. Nonetheless, in the event that the power supply isn't introduced, how to introduce it as follows.
A. Introduce the power supply in the right situation on the rear of the packaging and afterward lock it with screws.
B. Interface the power connector and power supply to the motherboard alongside the links. Establishment of the connector link from the power supply toward the finish of the gathering system.
Introducing the motherboard and packaging
links The packaging is the crate or spot where the processor or computer chip, motherboard, and different gadgets are found. To connect the motherboard and case links, follow these means.
a. Append the essential and optional IDE connector links to the motherboard.
b. For non-ATX motherboards, plug the sequential and equal port links into the connectors on the motherboard.
c. On the rear of the case there is an opening for introducing a non-space type extra port. Unscrew the locking plate covered by the port opening then, at that point, enter the connector port you need to introduce and screw it back in.
d. Interface the mouse and console connector link on the motherboard.
e. Interface other connector links like LEDs, interior speakers, and ports accessible on the PC case. f. For this cycle, do it cautiously and completely. Try not to allow errors to happen during the link establishment process.
Introducing drives
To introduce drives like hard drives, Album ROMs, or DVD-ROMs, do the accompanying.
a. Embed the drive from the front of the case.
b. In the first place, set the jumper design as expert or slave on the drive and afterward introduce the screws so the drive doesn't fall off.
c. Associate the IDE link connectors to the drives and connectors on the motherboard. The essential connector is utilized first.
d. In the event that the IDE link is associated with two drives, the jumper setting or the principal drive is set as a cover and the other as a slave.
e. The auxiliary IDE connector on the motherboard can be utilized to interface two extra drives.
g. Power link association from the power supply on each drive.
Introducing the connector card
For connector cards that are normally introduced are source, video cards, modems, and SCSI connectors. The establishment technique is to embed the connector card into the accessible space on the motherboard, then press it until the connector is completely embedded, then, at that point, screw it in as a holder for the card.
The last phase of PC get together
At the point when every one of the means for gathering the PC are finished, then cover it with the packaging and put the screws. Associate the links from the power supply to the wall attachment and interface the screen connector to the video card port, the console link connector, and the mouse connector to the mouse port.
Testing the aftereffects of PC get together
Whenever you first turn it on, the PC will go through three cycles, which are called booting. The three cycles are computer processor reset, power on individual test (POST), and circle boot. (Old 14)